KMS SAFETY BLOW GUN & EXTENSION
Proudly
SBG - Lever Safety Blow Gun
Standard Volume, with Lever activator
Qty 1-29..........12.75 ea.
Qty 30+...........11.75 ea.
Qty 1-29..........12.75 ea.
Qty 30+...........11.75 ea.
Lever style is most popular
SBGF - LEVER SAFETY BLOW GUN
High Volume, with Lever activator
Qty 1-29..........13.25 ea.
Qty 30+...........12.25 ea.
Qty 1-29..........13.25 ea.
Qty 30+...........12.25 ea.
SBG - Button Safety Blow Gun
Standard Volume, with Button activator
Qty 1-29..........12.25 ea.
Qty 30+...........11.45 ea.
Qty 1-29..........12.25 ea.
Qty 30+...........11.45 ea.
Button style for non-scratch uses
SBGF - Button Safety Blow Gun
High Volume, with Button activator
Qty 1-29..........12.60 ea.
Qty 30+...........11.70 ea.
Qty 1-29..........12.60 ea.
Qty 30+...........11.70 ea.
EXTENSIONS
These 1/4" threaded copper universal fit accessories help in reaching into holes and crevices.
KMS Copper Extensions
| Part No. 3EXT | 3" Length | 2.65 ea. | Add to Cart |
| Part No. 5EXT | 5" Length | 2.95 ea. | Add to Cart |
| Part No. 9EXT | 9" Length | 3.50 ea. | Add to Cart |
| Part No. 17EXT | 17" Length | 4.80 ea. | Add to Cart |
Product Features
ECONOMICAL
The patented venturi system uses side ports to combine free ambient air with costly compressed air, creating a fuller volume of usable output. This feature-packed blow gun outperforms its overpriced competitors.
TAMPERPROOF
Many managers have observed operators plugging or taping over their blow guns' vent holes in an effort to increase output. If the venturi side ports of a KMS Safety Blow Gun are blocked, the airflow output is noticeably reduced, thus eliminating the tamper incentive and preventing costly safety violations.
SAFETY COMPLIANT
Exceeds OSHA requirements by reducing compressed air pressure to less than 30 psi when dead-ended and by providing required safety shield for effective chip guarding. KMS Safety Blow Guns tested using 125 psi initial pressure put out approximately 20 psi nozzle pressure when blocked. Protective shield guards operator from blown debris and prevents lever from activating when dropped. Venturi side ports provide safety relief when blow gun is dead-ended.
POWERFUL & INDESTRUCTIBLE
KMS Safety Blow Guns provide full volume of air under normal operations. Rugged, chemical resistant Super-Nylon body has corrosion-resistant brass valve components. KMS Safety Blow Guns are the strongest blowguns on the market.
THREADED FOR KMS EXTENSIONS
Our 1/4"-diameter copper extensions come in four lengths so the air nozzle can be extended to clean crevices and hard-to-reach areas. Safety Blow Guns are threaded at the output end to fit KMS extensions, and threaded at the input end with 1/4" Female NPT (National Pipe Thread) to fit standard 1/4" Male NPT connection to air source.
FOUR MODELS
Select the blowgun output volume (standard or fuller) and activator (lever or button) to suit your industrial pneumatic application.